Chemistry Research | Explained Simply

Don’t miss the weekly article every Wednesday-Saturday on the latest research in chemistry.

Diamonds: The ability to conduct electricity

🧪 What does the paper actually show?
Claim: The ability of diamonds to conduct electricity due to the piezoelectric effect
Fields of application: In medical devices or in sensors

Introduction

Scientists at the University of Hong Kong have discovered that diamonds can conduct electricity by exhibiting a strong piezoelectric effect due to their ultrathin and highly flexible membranes. The piezoelectric effect is a phenomenon in which mechanical deformation can generate an electric current due to a difference in electric potential.

Storic belief

What the scientists have managed to achieve is simply extraordinary. Since the early 1900s, diamond has always been classified as a non-piezoelectric material because of their reticular symmetry, and for this reason, its use in electronic engineering has been rather limited.

It is used as a structural support for other piezoelectric materials, such as in microelectromechanical systems (MEMS), and as a substrate for the production of high-quality semiconductors found in electronic devices like phones and computers, which are essential for their proper functioning.

Diamonds connected to probes, emitting sparks in laboratory equipment; display reads output 14.7 volts, 2.3 amps.

Properties of a diamond

A diamond is one of the many allotropic forms of carbon. An allotropic form is a different arrangement of atoms within the same chemical substance. Major properties:

  • Hardness: on the Mohs scale, it has a hardness of 10, making it the hardest known material
  • Chemical resistance: thanks to its crystalline structure, it is highly resistant to numerous chemical reactions and to scratches
  • High acoustic velocity
  • Thermal conductivity: the highest of any natural solid material; that is, it allows energy to pass through in the form of heat
  • High dielectric breakdown strength: it is one of the best electrical insulators; that is, it does not conduct electricity under steady-state conditions

My note: I want to make it clear that this article is not intended to be a standalone scientific study. Through this blog, I hope to carefully share scientifically relevant information. If you’d like to explore this topic in greater depth, I invite you to refer to the links to the scientific research that I’m sharing here so you can analyze all the results.

diamonds
Crystalline structure of diamond. The atoms have spherical symmetry and are all carbon atoms.

Focus of the study

Their experiments focused on determining which membrane thickness produced the most significant piezoelectric response. Membranes approximately 5 micrometers thick (1 micrometer = 0.001 millimeter) exhibited the highest piezoelectric voltage coefficient, namely approximately 82.2 mV (millivolts per newton), which is higher than that of conventional piezoelectric materials.

How did they do it?

Using an edge-exfoliation method, the researchers succeeded in producing an ultra-thin, flexible polycrystalline membrane (consisting of many tiny microscopic crystals, also referred to as “grains” in metallurgy) approximately 5 micrometers thick (1 micrometer = 0.001 millimeter). This is how they induced the piezoelectric effect, making the material—which has traditionally been rigid—flexible and capable of bending while generating stable voltages.

This is the generation of an electrical voltage of the opposite polarity when the super-flexible material is pressed and released. e⁻ are the electrons that move in opposite directions when the material is pressed and released. Photo from Uncovering piezoelectric effect in polycrystalline diamond membranes | Science Advances.

Why is electricity generated?

What enables current generation is the distance between the two faces of two small crystals. This distance is called the “grain boundary.” In particular, there is an edge-induced asymmetry within the polycrystalline membrane, since it contains numerous crystals of varying sizes. It has been observed that in membranes exhibiting more or less discernible symmetry, the piezoelectric effect does not occur or does not occur to a significant degree.

As the membrane bends, positive ions (positive charges) and negative ions (negative charges) move asymmetrically. This clear separation of charges causes the energy resulting from the “mechanical” displacement of the charges to be converted into electrical energy.

diamonds
Polycrystal. Photo from Uncovering piezoelectric effect in polycrystalline diamond membranes | Science Advances.

Importance of the study

What they discovered is truly brilliant. It opens the door to new potential applications for diamond-coated membranes, such as in medical devices, as self-powered energy sources, or even as sensors to detect mechanical stress, such as deformations.

Bibliographic sources:

  1. Scientists discover diamonds can generate electricity | ScienceDaily – ScienceDaily, 2026
  2. Uncovering piezoelectric effect in polycrystalline diamond membranes | Science Advances – Science Advances, 2026

Read the latest article:

Balloons: A historic turning point – theChemistry

Thank you for reading

AUTHOR: CLAUDIA MORELLO

A chemistry student who wants to explain scientific research in chemistry as clearly as possible, even for those who know little about it.

CATEGORIES:

RECENT ARTICLES:

HOME ARCHIVES